Neither Flashy nor Sexy, but Strength and Movement are Crucial Stones to Athletics

At SAPT we tend to err on the conservative side of the training spectrum. Sure, there is a time and place for being pushed outside your comfort zone and try exercises that are challenging or working with weights that you never thought you’d ever lift… BUT that should only happen AFTER the foundation is unquestionably there. I’m primarily speaking about younger kids and adolescents, but the concept applies to adult trainees too.

This foundation is composed of a couple of things:

Movement- This is crucial. Poor or aberrant movement patterns only ingrain bad habits and set the trainee up for injuries down the road. This not only includes performing movements correctly, but also controlling one’s body in space. I’m talking about basic human/athletic movement like squat, hinge, push, pull, skipping/running, landing and jumping patterns… For example, I’ve witnessed kids perform a squat, technically correctly, but they have zero control over the speed of their descent.

Strength base- This goes hand-in-hand with movement quality. Weak people move poorly because they lack the strength to move correctly or control the movement consistently.

I made a handy chart for your visual folks:

I’m not the best at these technological things, but I think it gets the point across. 

I’m not the best at these technological things, but I think it gets the point across.

 

A deficit in either department will increase injury risk and continue to feed into the cycle of being weak and moving poorly. Hooray.

Athletes and the parents of the athletes we train have all kinds of goals when they come to us. They want to run faster, jump higher, throw harder, be more agile, prevent injuries… this list goes on; these are all great things!

Often, parents/coaches or even the athletes themselves have ideas as to what they need to accomplish those goals.

“Speed and agility work, can you guys program sprints and cutting drills?”
“Plyometrics. That’s what I need to jump higher.”
“Explosive training, that’s what my son needs.” (This was a literal, yet nebulous request. I’m not sure what this parent meant, did he want me to use dynamite?)
“I need to get my arm speed up, can you give me drills to improve my arm speed?”

However, as a coach, there are two barriers larger than the Wall of Westeros to those goals when athletes walk in our doors:

From wiki of Ice and Fire

From wiki of Ice and Fire

1. Primary athletic movement patterns-mentioned above- barely resemble human movement.

2. Strength levels that are less than optimal.

To be blunt, many kids are weak and the move like garbage.

The commonality with the athlete and parent requests mentioned previously is that they focus on a very specific aspect of athleticism or a sport. However, without the foundational stones of strength and efficient, correct human movement, all those lovely requests turn into Wile E. Coyote when he runs off the cliff.

From gifsoup.com

From gifsoup.com

The vast majority of an SAPT athlete’s training for the first two to three months (with a few exceptions) consists of creating those foundational stones. At times it may seem tedious, because, to be perfectly frank, a multitude of kids move so poorly that we have to start with light weights and rudimentary drills to even begin the building process. This often also includes tearing down bad habits and reforming new ones, which simply requires both time and consistently showing up to train.

It’s a process that can result in impatience due to lack of appreciation and understanding of the absolute necessity of that strength and movement base to start training the more “fun” or exciting aspects of athletic performance.

Therefore, the onus is on us, the coaches, to explain to parents and athletes why we’re doing the things we’re doing instead of the flashy exercises that compose the common perception of performance training (I’m looking at you parachute sprints and your ilk).

In the end, starting with the “explosive” training or speed work etc. will only wind up, at best, making the athlete marginally better and will probably top out at a certain point because the underlying movement and strength deficiencies are left unaddressed. (At worst, an injury occurs!)

Again, I apologize at the bluntness of my words but, here is what athletes and parents need to know:

You’re weak and you move like garbage. We need to fix these two problems before we do anything else.

As Dan John says, strength does magical things. I guarantee that when a person grows stronger and can perform the basic human/athletic movements well, their overall performance is going to improve dramatically-even before doing any of the fancy stuff.

Be consistent in your training, trust the process, and you’ll reap the benefits.

What is the Best Training Method?

Like many issues that we come across in life, there are two camps and people will stake their flag on one side and fight incessantly with the other. We saw this most vividly this past year- can I get an "amen!" that it's mostly over?- and if people thought the political arena was divided, they should step into the fitness world. 

My way is the right way!

My way is the right way!

Fat vs. Carbs! Powerlifting vs. Bodybuilding! Barefoot running vs. shoes! Crossfit vs. Everyone Else! (kinda kidding about that last one...) Mention any of those topics and you're sure to see a strength coach's flag come out. 

Another debate, albeit not as volatile as the ones above, is percentage-based training vs. RPE-based training.

First off, what does RPE mean? Well, I'll tell you, it stands for: 

Rate of Perceived Exertion.

RPE-based training is training that is founded on the principle of auto-regulation. It's a subjective measurement of your strength on a given day, how "difficult" does an activity feel. For example, depending on the circumstances of a particular training session- accounting for factors such as stress, nutrition, sleep, etc.- one day 185lbs might feel like a feather and other days it might feel like 385. RPE-based training allows for you to push the weights up on the days you feel like Superman and pull back on the days you feel like you've been beaten up by Superman.

I might program 3x3 reps with an RPE of 8. When prescribing RPE loads, here is a handy chart to explain what I mean:

From davedraper.com

In the case of the 3x3 for RPE of 8, the load should be one that the trainee could have theoretically moved for 5 reps. 

Second off, (side note: why doesn't anyone ever say that after they've said, "First off..."?) percentage-based training is a more commonly used training method of working off a percentage of your max effort in a certain lift. For example, you might work at 80% of your one-rep max for squat in a session. The theory is that, because your level of strength is X, as represented by your 1-rep max (1RM), you should be able to do a certain number or reps at a given percentage of 1RM since it's a sub-maximal weight. 

The aim of this post is, actually, NOT to plant a flag. I like both types of training and I think they're both equally useful and effective. I've experienced personal success as well as seen the people I've trained thrive with both methods. Like most things in the training world, it depends.

The point of this post is to explain the pros and cons of each and let the reader decide which method to follow. 

Percentage-Based Training

Pros:

  • Concrete number to use in training 
  • Decent assessment of how many reps to shoot for based on a certain percentage (thank you Prilepin's Chart)
  • By having a specific number to work with, it keeps you honest with your training. Sometimes you just need to grit your teeth and grab the bar and go. 

Cons:

  • Doesn't allow for alterations in weight based on how you feel, good or bad (and I'm not talking about "not feeling it today" but coming back from an illness or rehab-ing an injury or mega-life stress such as big family/work related events)

RPE-Based Training

Pros:

  • At the risk of sounding like a broken record, allows for fluctuations in training weights based on physiological and psychological readiness (being Superman or being a minion that got punched by Superman). You can push it or pull back depending on the day
  • Teaches auto-regulation and how to be more in-tune with your body. Auto-regulation can help stave off overuse injuries or overtraining in general because you're NOT pushing it when you're too fatigued. 

Cons:

  • No concrete number to train with (which can be a problem for very data-driven folks)
  • There is definitely a learning curve when it comes to judging how your body feels both during a lift and within a set even. Sometimes I think I've got a few reps in the tank only to be stapled by the next rep. 

What do I do with this information? 

So how do we apply this? Pretty easily: try it. Try both methods. Give yourself 8-12 weeks of training both ways and see which one works better for you, or which one you simply prefer. I've trained people who absolutely hate RPE because they don't have a specific number to use; I've worked with other people he hate percentage base because they never know how they're going to feel walking into a training session and the RPE gives them the freedom to adjust as needed. 

Personally, I currently use the RPE system. I have some health issues that affect how I feel on a daily (and sometimes hourly) basis and one day can differ wildly from the next. I've literally squatted a weight one week for 5 reps only to get crushed under the same weight after 2 reps. 

After you've tried both ways, choose the one that works best and stick with it. And then keep sticking with it...

In the end, however, the biggest factor in training is not, which method of training you use; the biggest factor is being consistent. Consistently show up and magical things happen. Just choose a method, train consistently, the method is a tool to get you towards your training goals.  

Does Eating at Night Cause Weight Gain?

Since the holidays are upon us, I figured one thing that might be stewing in the back of people's brains is the holiday-weight-gain.

First off, it's NOT inevitable, so don't resign yourself to your fate; the holidays are a time for celebrating and enjoying food with family and friends. However, I think many people take it as license to go hog-wild. There is a happy medium: indulge a little bit but get back on track during the days that don't require a big or celebratory meal. (You don't have to say "yes" to every morsel at every party...) Choose the days that are the most important to you and enjoy them! That office Christmas party? Maybe hold back and choose the healthier options or have small portions, in another word: strategize!

*steps off soap box*

In that same line of thinking, people are attracted to quick fixes or "easy" solutions to weight loss (especially post-holiday season). Save your self some aggravation and read the following article (below). 

One of the proliferating "maxims" of the nutrition advice that floats around out there (and this particular piece typically comes from dubious sources)...

Just sayin'...

Just sayin'...

... is that eating at night (or past 6PM or some other arbitrary number) will cause weight gain.

Once again the intelligent folks at Examine.com put out a great article that looked at a handful of studies to see if that maxim can hold its own against science. 

Read it HERE

Spoiler: though there is no rock-solid answer, it comes down to knowing your own tendencies. Do you often to make poor choices when you're tired, stressed, and hungry (as most people find themselves at the end of the day)? If so, then maybe you do need to cut yourself off at night. If you don't struggle with that- say you've planned ahead and you have a healthy dinner ready to go- then you can probably have a li'l somethin' as you unwind for the evening. 

Plan ahead and pick up heavy things

 

How to Eat on the Road

There is a saying out in the fitness world, I'm not sure who said it first, but it implores, 

"Don't fuel your body where you fuel your car." 

The implication is that gas station food is generally, well, lacking in the health department. I'm all for packing healthy snacks and meals but sometimes life throws you a curveball (or two) and you find yourself bereft of a delightfully nutritious snack and you have to make do with gas station fare. The goal should be not to fill yourself up, but to find something to tide you over until you can find a healthier option (like a restaurant or grocery store).Here are some tips: 

  1. Go for protein- When in doubt, aim for something with a decent amount of protein as those tend to be things like beef jerky. This isn't to say that you should spring for the hot dog that's been sitting in the warmer all day, but generally higher-protein snacks tend to be a bit better. Some fancy places, like Sheetz and Wa-Wa, actually have a made-to-order bar or fresh fare like hard-boiled eggs. Opting for a grilled chicken sandwich or even a hamburger (minus glops of sauce) will be friendlier to your waist-line than the chips and cookies. 
  2. Nuts and Seeds are Your Friends- Most gas stations have mixed nuts, sunflower seeds, trail mix or something like those. The fat will satiate you until you find a better option. 
  3. Be A Label Reader- Worst comes to worst and you're in the middle of nowhere and the only thing remotely "healthy" is the box of granola bars. Well, not so fast my friend. Read the label and you may find that the granola bar has more sugar than a Snickers bar. Actually, a Snicker's bar might even be better since it has the peanuts (fat and protein, to a degree) that will hold you over longer than a purely carbohydrate granola bar. 
  4. Drink Water- I know, drinking more water means stopping more, but at least you'll be hydrated and able to process any not-so-great food you have to eat more easily. 

For the conscientious eater, it can be a bit tough to find edible fare in a gas station, but with a little discernment, it can be done!

Exercise You Should Be Doing: Slider Swimmers

Today's installment is for all you people out there with cranky or achy shoulders, or people who want to prevent cranky and achy shoulders... so pretty much everyone.

I'm trying to keep this post short, so the anatomical explanations are pretty cursory. More shoulder posts to follow I guess.

A few of the common causes for most people's shoulders to scream at them include:

  1. Poor scapular (shoulder blade) movement: the shoulder blades do not upwardly rotate along the rib cage well as the arms go over head and thus pinching occurs at the shoulder joint. To put it another way, the scapulae do not glide well on the rib cage which is key to healthy overhead movements.
  2. Poor muscular control: the muscles that surround the shoulder blade are either weak or not even turning on to control the movement of the scapulae- see point number 1. 
  3. Poor muscular control Part 2: the muscles of the rotator cuff are unable to stabilize the head of the humerus (the upper arm bone) on the glenoid fossa (where the ball-in-socket aspect of the shoulder is. Though really it's more of a golf ball on a tee, but that's another post).

Enter the Slider Swimmers:

I stole this from Jen Sinkler's Lift Weights Faster program and I really, really like them. 

How to:

  • Lay on your stomach with hand on sliders, obviously, with palms at your arm pits. Take note of your pelvic position, you shouldn't have your butt sticking up and your lower back overly arched. Squeeze you butt and tuck your hips under (you can see my adjust mine at the very beginning of the video) so that your lower back isn't overextended. If you can't get into a good position, place a small, rolled-up towel under your hips to put you in a neutral position. 
  • Apply pressure throughout the whole movement through your hands as you slide your hands over your head. You should feel a little bit of tricep action going on (it's the long head of the tricep, if you're curious) as you slide upwards. This is 50% of the benefit of the drill: teaching proper scapular movement on the rib cage in an overhead motion.
  • Keep the pressure steady as you bring your hands back to the starting position. In order to activate the small muscles around the shoulder blade and rotator cuff, think about pinching a pencil between your shoulder blades and gently driving your elbows into your rib cage. This is the other 50%: activating and strengthening the muscles that control the movement of the scapulae and humeral head. 

Why do I like this drill? 

It remedies the major issues mentioned at the beginning of the post: scapular movements, muscular control of the scapulae, and muscular control of the humeral head. This would be a great drill to put either in a warm-up or as a "filler" between sets of a main movement, like bench press. 

How to Write a Warm-Up Progression for Weight Lifting

In last week’s posts we went over general dynamic warm-ups and how to warm up for specific barbell movements, aka, the squat, bench, and deadlift.

Today’s post is even more nuanced: how to warm up once you’re under/over (if you’re deadlifting properly you should be over the bar…) the barbell.

If I had a dollar for every time I saw someone jump right into their working weight for a barbell movement, I could make it rain.

from giphy.com

As you intelligent readers know, skipping warm-ups can lead to physical injury. It can also lead to your pride receiving a good smack in the face too.

True story: while at a commercial gym, I watched a fellow saunter up to the bench, flap his arms around, and then throw on 225… he then was promptly stapled with the weight. Fortunately his lifting partner was there to help get him out, but still, he was pretty embarrassed because it was, apparently, a weight he could “normally do, but he was just sore…”

Moral of the story: don’t be a fool and skip your warm-up unless your goal is to entertain people around you by your failures.

I can almost guarantee that if he warmed up properly, he would have saved his injured pride. (Assuming of course that he can actually bench 225.)

Anyway, back to warming up.

WHY

  • Prepare the specific muscles, joints, and tendons for work. As you warm-up, you increase blood flow to the muscles and stimulate the flow of synovial fluid in the joint (all kinds of flowing going on). The synovial fluid is there to reduce friction in the joint amongst the bones, ligaments, and articular cartilage- always a good thing- to reduce the tin-man-like grinding within the joint. This reduces the chance of injury to either the bone or cartilage (early onset arthritis anyone?).
  • Fire up that CNS (central nervous system). Trying to train without a primed and ready-to-go CNS, which tells your muscles what to do and how quickly to do it, is like trying to write a blog post without turning on the computer; it’s is not only a waste of time but rather difficult to accomplish anything tangible outside of producing frustration.
  • Mentally prepare you for your lift. Stress from the outside, be it work, school, family, lack of a new Harry Potter book, can easily crowd out the mental focus needed for executing the lift. Personally, warm-up sets build walls in my mind that block out anything that’s not related to that specific lift so I can focus entirely on all the thoughts that need to be thunk. The feeling of executing a near-flawless rep should be on everyone’s top ten most-satisfying-things-list.

All this needs to happen- key point here- without creating unnecessary fatigue. Which leads me to my next point...

COMMON MISHAPS

On one hand, there are those who skip warm-ups entirely- who have been chastised sufficiently up to this point- while on the other, there are people who warm up too much or make mistakes that render the warm-up about as useful as a poop-flavored lollipop. Here are a few of said pitfalls:

  • Doing too many reps and/or sets. If you’re essentially doing a workout before you actually hit your working sets, you’ve overdone the warm-up thing. Performing 4 sets of 10 reps of increasingly heavier weight isn’t a warm-up, it’s a workout. Stop this nonsense.
  • Taking enormous jumps in weight close to your working set weight. It’s one thing to make 20 or 30 pound jumps if you’re very early in your warm-up sequence, say, the second or third warm-up set, but doing so right before your working set is a poor decision my friend.
  • Missing the opportunity that warm-up sets afford to “grease the groove” of the movement. Since the weight is lighter, these sets should be performed as perfectly as possible; again, I could make it rain with the number of times I’ve seen someone rush through warm-ups or are a sloppy mess with their form. Practice doesn’t make perfect, it makes permanent so practice perfectly.

HOW?

The warm-up is dependent on several factors, so don’t take these as rules, but more like guidelines.

from giphy.com

Movement- complexity of movement i.e a squat versus a weighted pull up, the squat is more complex and has more moving parts.

Timing within the workout- movements earlier on will require more warm-up sets than subsequent ones.

Working weight- the higher the working weight, the more warm-ups needed

Age/Injuries- older people and/or people with prior injuries (not always the same thing) will need more time to warm-up than those who are neither of those categories. (however, if they want to stay out of the latter, they should warm-up sufficiently…)

Experience level- this is often co-dependent on the working weight. Less experienced trainees are generally training with lower weights and don’t need as many warm-ups, however, this isn’t always true, so it’s a less concrete factor.

All that said, what does this actually look like? I have a couple of examples and you can use these to extrapolate to your own training. In general, a couple of things to keep in mind:

As weight increases, the reps should decrease

  • Big jumps are ok in the beginning, but they should decrease as you approach your working weight
  • Try not to take a bigger jump than the prior set’s jump. By that I mean, don’t make a 20 pound jump if on the prior set you only increase by 10 pounds.  
  • Usually, you can take bigger jumps for your lower body than upper body.

There are several charts out on the interwebs that provide percentages of your working weight and correlate it to the number of reps. This is totally fine if you’re a precise numbers person, but due to my personal detestation of doing complex math during training I usually choose my weights based on the most convenient plate additions. It’s called the “science of plate math according to Kelsey.”

Again, there are a several different ways to do this, and some coaches prescribe sets of 10 or 8 in the beginning, which I’m not opposed to at all. Choosing the number of reps per set depends on the movement. Here are some very general examples:

Note that these are assuming a working set of 5 reps.

Deadlift, working weight of 250

Set 1- 135 x 5

Set 2- 185 x 3

Set 3- 205 x 3

Set 4- 225 x 2

Set 5- 240 x 1

Start working sets

Bench, working weight of 185

Set 1- bar x 5-10

Set 2- 95 x 5

Set 3- 135 x 3-5

Set 4- 155 x 3

Set 5- 175 x 1

Start working sets

Squat, working weight of 200

Set 1- bar x 5-10

Set 2- 135 x 5

Set 3- 165 x 3

Set 4- 185 x 2

Set 5- 195 x 1

Start working sets

Those are pretty simple examples, but I think they illustrate the point of how to choose weights when warming up.

So, what are the key points to remember?

Don’t be a fool and skip your warm-up.

Utilize your warm-up sets judiciously but not excessively and don’t be a slob when doing them.

Warm-ups should energize you and prime your body and mind for lifting, not fatigue you. You should be chomping at the bit once you start your working sets.

Combine all that and you’re in for one fan-freakin’-tastic training session!